Description
HBC19B Rebar Cutter, Handheld, 3/4" Bar Capacity, 115V
The HBC-19 uses an electro-hydraulic design to handle virtually any rebar cutting job, from slabs and masonry walls to large buildings and bridges.
- Cuts rebar up to 0.75-inches (20 mm) thick in 2.5 seconds
- 115V, 60 Hz single-phase motor
- Hydrualic pump features magnetic particle filtering for maximum life
- Heat-treated steel blades can be rotated to maximize cutting life
- Weighing only 28.2 pounds (12.8 kg) the unit is easily moved around the jobsite
Rated Power | 11.5 A | |
Max. Cutting Speed | 2.5 sec | |
Electric Motor | 115 Volt, 60 Hz, single phase | |
Notes:<%stf_notes%> |
Max. Bar Size | No. 6 | |
Max. Bar Diameter | 0.75 in | 19 mm |
Max. Bar Size | No. 6 | |
Max. Bar Diameter | 0.75 in | 19 mm |
Max. Bar Size | No. 6 | |
Max. Bar Diameter | 0.75 in | 19 mm |
Overall Length | 15.6 in | 396 mm |
Overall Width | 4.4 in | 110 mm |
Overall Height | 8.7 in | 230 mm |
Operating Weight | 28.2 lb | 12.8 kg |
Shipping Weight | 39 lb | 17.7 kg |
Notice: Features and equipment specifications are subject to change without notice.
Warranty
Danse Equipment Company assures warranty of one year from the date of purchase on any products purchased, against defects in ...
workmanship or materials under normal use, unless otherwise specified.
Furthermore, Danse Equipment will pass any additional manufacturer’s warranty privileges to the purchaser. Any equipment damaged or abused will be voided of warranty and will not be covered.
For information on a specific manufacturer’s warranty, please contact us at [email protected] with the date, invoice and product details
Show moreReviews (0)
0
5 Star
0
4 Star
0
3 Star
0
2 Star
0
1 Star
0
100%
of respondents would
recommend this to a friend