Multiquip MB25A Portable Rebar bender, Bench Type, 1" Bar Capacity, 115V

Multiquip MB25A Portable Rebar bender, Bench Type, 1" Bar Capacity, 115V

$4,500.00
$4,500.00
Sale Sold out
  • Multiquip MB25A Portable Rebar bender, Bench Type, 1" Bar Capacity, 115V
1 1
MultiQuip

Multiquip MB25A Portable Rebar bender, Bench Type, 1" Bar Capacity, 115V

Multiquip MB25A Portable Rebar bender, Bench Type, 1" Bar Capacity, 115V

Danse #: MB25A
Mfr #: MB25A
$4,500.00
$4,500.00
Sale Sold out
View full details

Description

Multiquip MB25A Portable Rebar bender, Bench Type, 1" Bar Capacity, 115V


This compact rebar bender is ideal for both high-production workshops or job sites.

  • Bends rebar up to 1-inch (25 mm), up to 180 degrees diameter in seconds
  • Angle adjustment knob allows fine tuning of bending angle
  • Standard foot switch provides the operator the ability to free up hands for safe material handling
  • Driven by a 115-Volt, single-phase electric motor @ 13 amps
  • A complete set of rollers and collars is included to quickly change your bending radius
  • Two built-in lifting handles are provided for easy movement around the job site 
Unit Specifications

Max. Rebar Diameter 1 in 25.4 mm
Bending Range 0 to 180
Max. Bending Speed 180° - Approx. 5 sec
Electric Motor 115V, 60 Hz, 1Ø, AC
Bending Radius Specifications

No. 3 Rebar Diameter 3/8 in 9.5 mm
Radius 2.25 in 57 mm
No. 4 Rebar Diameter 1/2 in 12.7 mm
Radius 3 in 76 mm
No. 5 Rebar Diameter 5/8 in 15.9 mm
Radius 3.75 in 95 mm
No. 6 Rebar Diameter 3/4 in 19 mm
Radius 4.5 in 114 mm
No. 7 Rebar Diameter 7/8 in 22.2 mm
Radius 5.25 in 133 mm
No. 8 Rebar Diameter 1 in 25.4 mm
Radius 6 in 152.4 mm
Accessories
Standard Accessories Foot Switch
Rollers (5 sizes)
Collars (6 sizes)
Tool Kit
Waterproof Cover
Dimensions & Weights

Overall Length 21 in 530 mm
Overall Width 19.5 in 500 mm
Overall Height 17 in 430 mm
Operating Weight 227 lb 103 kg
Shipping Weight 331 lb 150 kg
Notice: Features and equipment specifications are subject to change without notice.

Warranty

Danse Equipment Company assures warranty of one year from the date of purchase on any products purchased, against defects in workmanship or materials under normal use, unless otherwise specified. Furthermore, Danse Equipment will pass any additional manufacturer’s warranty privileges to the purchaser. Any equipment damaged or abused will be voided of warranty and will not be covered. For information on a specific manufacturer’s warranty, please contact us at [email protected] with the date, invoice and product details.