{"product_id":"multiquip-mikasa-8511s-11-inch-wood-shoe-kit-mtx-rammers","title":"Multiquip Mikasa 8511S — Genuine OEM 11\" Wood Shoe Kit for MTX70HD, MTX70HDR, MTX70HF \u0026 MTX80HDR Tamping Rammers","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe shoe is the only part of a tamping rammer that touches the ground. On a Multiquip MTX-Series rammer running at full RPM, the foot strikes the substrate \u003cstrong\u003e644 to 695 times every minute\u003c\/strong\u003e — roughly \u003cstrong\u003e310,000 to 334,000 ground impacts in a single 8-hour shift\u003c\/strong\u003e. The laminated wood shoe absorbs every one of those impacts, and over time it cracks, splits, separates from its tempered-steel base plate, and walks the mounting bolts loose.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eMultiquip part \u003cstrong\u003e8511S\u003c\/strong\u003e is the genuine OEM 11-inch wood shoe kit that returns your rammer to factory-spec compaction performance. The kit fits the entire 11-inch-shoe MTX-Series lineup — \u003cstrong\u003eMTX70HD, MTX70HDR, MTX70HF, and MTX80HDR\u003c\/strong\u003e — and ships complete with the laminated wood pad, the tempered steel base plate, and all the mounting hardware needed for installation.\u003c\/p\u003e\n\u003ch3 class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eWhy genuine OEM matters on a wear part this critical\u003c\/h3\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eA worn or undersized aftermarket shoe doesn't fail in isolation — it transmits asymmetric impact loads upward into the bellows (368346180), the main spring (368461270), and the spring cylinder (368347281) above it. Operators who run a degraded shoe past its replacement window typically end up replacing two or three additional components within six months. The 8511S kit is engineered to the same factory specification as the shoe that shipped on your rammer when it left Multiquip's production line — same wood lamination grade, same steel plate temper, same bolt-hole tolerance.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eDanseUSA has been an authorized Multiquip parts dealer since \u003cstrong\u003e1981\u003c\/strong\u003e. Every 8511S ships in original Multiquip packaging through authorized supply channels, with full OEM warranty eligibility on the part.\u003c\/p\u003e\n\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\n\u003ch2 class=\"text-text-100 mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eWhat's in the 8511S Kit\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe 8511S is a \u003cstrong\u003ecomplete shoe-replacement bundle\u003c\/strong\u003e, not a stand-alone wood pad. The OEM kit ships with everything needed to bolt a new shoe to the foot housing in a single transaction:\u003c\/p\u003e\n\u003cdiv class=\"overflow-x-auto w-full px-2 mb-6\"\u003e\n\u003ctable class=\"min-w-full border-collapse text-sm leading-[1.7] whitespace-normal\"\u003e\n\u003cthead class=\"text-left\"\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\" class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\"\u003eComponent\u003c\/th\u003e\n\u003cth scope=\"col\" class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\"\u003ePurpose\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eLaminated wood shoe pad (11\" wide)\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eMulti-ply ground-contact wear surface; engineered for shock absorption\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eTempered steel base plate\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eStructural interface that bonds the wood pad to the rammer foot housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eSquare-neck mounting bolts\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eThrough-bolt the assembly to the foot housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eLock washers\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eAnti-loosening preload retention\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eNylon lock nuts\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eVibration-resistant nut-side retention\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cbr\u003ePer Multiquip's MTX-Series Operation Manual, the foot construction is described as \u003cstrong\u003e\"laminated wood with tempered steel plate for superior shock absorption.\"\u003c\/strong\u003e The two-layer engineering protects the rest of the rammer from sharp impulse loads — the wood absorbs, the steel transmits, and the rammer's spring\/bellows system above the foot operates within its designed loading envelope.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eLegacy part-number cross-reference:\u003c\/strong\u003e The 8511S supersedes Multiquip part numbers \u003cstrong\u003e366910020\u003c\/strong\u003e and \u003cstrong\u003e362910130\u003c\/strong\u003e. If your service records, parts manual, or fleet inventory references either older number, the 8511S is the direct factory replacement.\u003c\/p\u003e\n\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\n\u003ch2 class=\"text-text-100 mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eMulti-Model Compatibility Table\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe 11-inch wood shoe is shared across the entire MTX70\/MTX80 platform regardless of engine package or impact rating. The same physical 8511S kit fits all four models confirmed in Multiquip's parts manual lookup:\u003c\/p\u003e\n\u003cdiv class=\"overflow-x-auto w-full px-2 mb-6\"\u003e\n\u003ctable class=\"min-w-full border-collapse text-sm leading-[1.7] whitespace-normal\"\u003e\n\u003cthead class=\"text-left\"\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\" class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\"\u003eRammer Model\u003c\/th\u003e\n\u003cth scope=\"col\" class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\"\u003eEngine\u003c\/th\u003e\n\u003cth scope=\"col\" class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\"\u003eImpact Force\u003c\/th\u003e\n\u003cth scope=\"col\" class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\"\u003eOperating Weight\u003c\/th\u003e\n\u003cth scope=\"col\" class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\"\u003eBest Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e\u003cstrong\u003eMTX70HD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eHonda GX100\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e3,350 lbf (1,520 kgf)\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e~168 lbs\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eMost popular middleweight; confined-area utility-trench backfill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e\u003cstrong\u003eMTX70HDR\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eHonda GXR120\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e3,350 lbf (1,520 kgf)\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e~168 lbs\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eHigh-altitude \/ mountain-corridor compaction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e\u003cstrong\u003eMTX70HF\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eHonda GX100UKRB5\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e2,855 lbf (12.7 kN)\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e163 lbs\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eLegacy 70-class platform (Op Manual Rev. #0, 2012)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e\u003cstrong\u003eMTX80HDR\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eHonda GXR120\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e3,505 lbf (1,590 kgf)\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e181 lbs\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eLargest in MTX line; deep-trench heavy-duty work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003e\u003cbr\u003eShoe footprint across all four models:\u003c\/strong\u003e 11.2 × 13.4 in (285 × 340 mm). Mounting bolt pattern, hardware grade, and base plate geometry are identical.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eImportant — what 8511S does NOT fit:\u003c\/strong\u003e The 8511S is for the 11-inch-shoe platform only. It does \u003cstrong\u003enot\u003c\/strong\u003e fit smaller MTX rammers — specifically the MTX50HD and MTX60HD, which use a 10.4-inch shoe (foot assembly 362910150) with a different mounting footprint. If you're servicing an MTX50HD or MTX60HD, you need a different shoe kit; contact us for the correct part number.\u003c\/p\u003e\n\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\n\u003ch2 class=\"text-text-100 mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eFailure Modes — When to Replace the Shoe\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eMultiquip's MTX-Series Operation Manual lists shoe inspection under \u003cstrong\u003edaily preventive maintenance\u003c\/strong\u003e. The shoe is treated as a scheduled-replacement consumable, not a run-to-failure component. The field signals indicating immediate replacement:\u003c\/p\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eVisible cracks\u003c\/strong\u003e running across the wood face, especially around the bolt holes\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eLamination separation\u003c\/strong\u003e — the wood layers begin to delaminate and air gaps appear at the edges\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eMushroomed or recessed bolt heads\u003c\/strong\u003e — impact loading has deformed the hardware\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eAsphalt or aggregate embedded\u003c\/strong\u003e in the wood face causing imbalance or surface contamination\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eUneven wear pattern\u003c\/strong\u003e across the face indicating asymmetric impact distribution\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eAudible change\u003c\/strong\u003e in the rammer's compaction note — a worn shoe sounds different than a fresh one\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eReplacement intervals vary by application and machine. As a working baseline:\u003c\/p\u003e\n\u003cdiv class=\"overflow-x-auto w-full px-2 mb-6\"\u003e\n\u003ctable class=\"min-w-full border-collapse text-sm leading-[1.7] whitespace-normal\"\u003e\n\u003cthead class=\"text-left\"\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\" class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\"\u003eRammer\u003c\/th\u003e\n\u003cth scope=\"col\" class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\"\u003eTypical Shoe Replacement Interval (Commercial Use)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eMTX70HD on mixed soil\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e6–12 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eMTX70HDR on mountain\/elevation work\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e5–9 months (drier air accelerates wood pad shrinkage)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eMTX70HF on lower-impact applications\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e9–14 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eMTX80HDR on heavy-duty deep-trench work\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e4–9 months (highest impact loading in the line)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\n\u003ch2 class=\"text-text-100 mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eInstallation Pointers (Universal)\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe 8511S installs on all four compatible models using the same procedure. Steps that materially affect install quality:\u003c\/p\u003e\n\u003col class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-decimal flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eShut down and allow the foot housing to cool\u003c\/strong\u003e before disassembly. The muffler heat-soaks adjacent components during operation.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003ePhotograph the existing bolt arrangement\u003c\/strong\u003e before removing the worn shoe. The square-neck bolts seat in specific orientations on the steel plate, and reproducing the pattern from memory wastes bench time.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eInspect the foot housing mating surface\u003c\/strong\u003e for impact damage from the failed shoe. If you see scoring, gouging, or hairline cracks in the housing itself, address that before installing the new shoe — running a fresh shoe against a damaged housing causes premature replacement.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eUse the OEM hardware that ships with the 8511S kit.\u003c\/strong\u003e The square-neck bolts are graded for impact loading. Substituting hardware-store bolts is the most common field cause of premature shoe-bolt loosening.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eTorque the new hardware in a cross-pattern sequence\u003c\/strong\u003e, not sequentially around the perimeter. Cross-pattern torquing creates even preload distribution across the bolt joint.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eRe-torque after the first 30 minutes of run time\u003c\/strong\u003e, again at 4 hours, and once more at the 24-hour mark. Bolt preload migrates during the first day of operation under impact loading; after that, the joint is settled.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eBench-verify the rammer's idle-to-full-RPM transition\u003c\/strong\u003e before sending the unit back into service. A shoe-replacement that introduces installation issues sometimes shows up as RPM hunting under load.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\n\u003ch2 class=\"text-text-100 mt-3 -mb-1 text-[1.125rem] font-bold\"\u003ePart Identification \u0026amp; Cross-Reference\u003c\/h2\u003e\n\u003cdiv class=\"overflow-x-auto w-full px-2 mb-6\"\u003e\n\u003ctable class=\"min-w-full border-collapse text-sm leading-[1.7] whitespace-normal\"\u003e\n\u003cthead class=\"text-left\"\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\" class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\"\u003eIdentifier\u003c\/th\u003e\n\u003cth scope=\"col\" class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eCurrent OEM Part Number\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e\u003cstrong\u003e8511S\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eSuperseded Part Number (older)\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e366910020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eSuperseded Part Number (older)\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e362910130\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eBrand\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eMultiquip Mikasa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eType\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eTamping Rammer Wood Shoe Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eShoe Width\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e11 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eOEM\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eYes — Genuine Multiquip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eHardware Included\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eYes (bolts, washers, nuts)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eCompatible Rammer Models\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eMTX70HD, MTX70HDR, MTX70HF, MTX80HDR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eAuthorized Dealer\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eDanseUSA (since 1981)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\n\u003ch2 class=\"text-text-100 mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ: Will the 8511S fit my specific Multiquip rammer?\u003c\/strong\u003e The 8511S fits all current 11-inch-shoe MTX-Series rammers — MTX70HD, MTX70HDR, MTX70HF, and MTX80HDR. The same kit also fits legacy MTX70, MTX80, and MTX90 units (the 11-inch shoe platform predates the HD designation). If your serial plate confirms any of those models, this is the correct part. For MTX50HD or MTX60HD (10.4-inch shoe), this is the wrong part — contact us for the correct kit.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ: Is the 8511S the same as 366910020 and 362910130?\u003c\/strong\u003e Yes. Multiquip consolidated the legacy part numbers 366910020 and 362910130 into the current 8511S SKU. All three numbers reference the same physical wood shoe kit. If your old parts manual or service records cite either older number, the 8511S is the direct supersession.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ: Does the kit come with bolts, washers, and nuts?\u003c\/strong\u003e Yes. The OEM 8511S ships with all mounting hardware required for installation — square-neck bolts, lock washers, and nylon lock nuts. No separate hardware purchase is needed.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ: How is the wood shoe constructed?\u003c\/strong\u003e Per Multiquip's Operation Manual, the foot construction is \"laminated wood with tempered steel plate for superior shock absorption.\" The wood pad is a multi-ply laminate engineered to absorb impact progressively rather than transmitting a sharp impulse to the bellows and spring components above. The steel plate provides the structural interface to the rammer foot housing.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ: How often should I replace the wood shoe?\u003c\/strong\u003e Replacement intervals depend on impact rating, run hours, and substrate hardness. For typical commercial use: MTX70HD every 6–12 months, MTX70HDR every 5–9 months, MTX70HF every 9–14 months, MTX80HDR every 4–9 months. Inspect daily and replace at the first sign of cracking, lamination separation, or bolt-head deformation.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ: What's the difference between an OEM 8511S and aftermarket 11-inch shoes from Amazon or eBay?\u003c\/strong\u003e Aftermarket 11-inch shoes are dimensionally similar to the OEM 8511S but vary widely in wood lamination grade, steel plate temper, and bolt-hole tolerance. The 8511S is manufactured to factory specification and is compatible with Multiquip's warranty terms. For commercial-fleet operators where downtime cost outweighs unit cost, OEM is typically the lower-total-cost option over the rammer's service life.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ: Will replacing the shoe void my Multiquip warranty?\u003c\/strong\u003e No — replacing wear components like the shoe is normal preventive maintenance and does not affect warranty terms. Using the genuine OEM 8511S keeps the rammer in factory-spec configuration. If your unit is still under original warranty and you have questions about coverage, contact us with your purchase information.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ: Can I install the 8511S myself, or do I need a Multiquip-authorized service center?\u003c\/strong\u003e Field installation is straightforward with basic hand tools. The kit ships with all required hardware. Most fleet mechanics complete the install in 30–60 minutes. Document the installation with photos if your unit is under warranty and the shoe failure was accompanied by other foot-assembly damage.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ: How is the 8511S shipped?\u003c\/strong\u003e DanseUSA ships the 8511S in original Multiquip packaging via standard ground service. Some MTX-Series components may ship from Multiquip's distribution warehouse direct — when that happens, your order may arrive in separate packages with individual tracking numbers.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ: Is the 8511S in stock right now?\u003c\/strong\u003e Stock status updates in real time on this product page. Most orders placed before noon ET ship the same business day. If a stock issue affects your order, we'll notify you before any charge is finalized.\u003c\/p\u003e\n\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\n\u003ch2 class=\"text-text-100 mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eImportant Ordering Notes\u003c\/h2\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eMake sure the part numbers are correct, certain parts are serial number specific.\u003c\/strong\u003e The MTX-Series has been through multiple production revisions — verify your machine's serial plate matches the model designation before ordering.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eContact us for parts identification and confirmation of part numbers.\u003c\/strong\u003e Email \u003ccode class=\"bg-text-200\/5 border border-0.5 border-border-300 text-danger-000 whitespace-pre-wrap rounded-[0.4rem] px-1 py-px text-[0.9rem]\"\u003ecustomerservice@danseusa.com\u003c\/code\u003e with photos of your engine label, serial plate, and existing shoe assembly. Same-business-day verification on all parts inquiries.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eCertain items may be drop shipped direct from the manufacturer.\u003c\/strong\u003e Your order may arrive in separate packages with individual tracking numbers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\n\u003ch2 class=\"text-text-100 mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eWhy Order from DanseUSA\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eDanseUSA has been an \u003cstrong\u003eauthorized Multiquip parts dealer since 1981\u003c\/strong\u003e. Pre-internet, pre-eBay, pre-everyone-claiming-OEM. Every 8511S ships in original Multiquip packaging, sourced through authorized supply channels — same OEM part the local Multiquip-authorized service center installs, eligible for any open Multiquip warranty on your rammer.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eQuestions on fitment, serial-number breaks, or fleet pricing? Email \u003ccode class=\"bg-text-200\/5 border border-0.5 border-border-300 text-danger-000 whitespace-pre-wrap rounded-[0.4rem] px-1 py-px text-[0.9rem]\"\u003ecustomerservice@danseusa.com\u003c\/code\u003e with photos of your unit's engine label and existing shoe assembly. Same-business-day response on all parts inquiries.\u003c\/p\u003e","brand":"MultiQuip","offers":[{"title":"Default Title","offer_id":46266270253282,"sku":"8511S","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/0204\/2082\/files\/8511s_d8208f50-1fa9-49a5-b136-056bd2f3a462.png?v=1778434937","url":"https:\/\/www.danseusa.com\/products\/multiquip-mikasa-8511s-11-inch-wood-shoe-kit-mtx-rammers","provider":"Danse USA","version":"1.0","type":"link"}