{"product_id":"multiquip-mikasa-kitshoemtx50-362910150-wood-shoe-kit-mtx50hd-mtx60hd","title":"Multiquip Mikasa KITSHOEMTX50 \/ 362910150 — Genuine OEM 10.4\" Wood Shoe Kit for MTX50HD \u0026 MTX60HD Tamping Rammers","description":"\u003cblockquote class=\"ml-2 border-l-4 border-border-300\/10 pl-4 text-text-300\"\u003e\u003c\/blockquote\u003e\n\u003ch2 class=\"text-text-100 mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eMultiquip Mikasa KITSHOEMTX50 \/ 362910150\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe wood shoe is the only consumable wear part on a Multiquip MTX50HD or MTX60HD tamping rammer. It's the single point of contact between the rammer and the substrate, and it absorbs \u003cstrong\u003eevery one of the 644 to 695 impacts the foot delivers each minute\u003c\/strong\u003e at full RPM. Across an 8-hour workday, that's roughly \u003cstrong\u003e310,000 to 334,000 ground strikes\u003c\/strong\u003e absorbed by a multi-ply laminated wood pad bolted to a tempered steel base plate.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eEventually that pad cracks, splits, separates from the steel plate, and walks the bolts loose. \u003cstrong\u003eA worn shoe doesn't fail in isolation\u003c\/strong\u003e — it transmits asymmetric impact loads upward into the bellows, the main spring, and the spring cylinder above. Operators who run a degraded shoe past its replacement window typically end up replacing two or three additional components within six months. Replacing the shoe on schedule protects the rest of the rammer.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eMultiquip part \u003cstrong\u003eKITSHOEMTX50\u003c\/strong\u003e (which supersedes the legacy \u003cstrong\u003e362910150\u003c\/strong\u003e part number) is the genuine OEM 10.4-inch wood shoe kit that fits both the MTX50HD and the MTX60HD foot mount in factory-spec configuration. The kit ships complete with the wood pad, the tempered steel base plate, and all mounting hardware.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eDanseUSA has been an authorized Multiquip parts dealer since \u003cstrong\u003e1981\u003c\/strong\u003e. Every KITSHOEMTX50 ships in original Multiquip packaging through authorized supply channels.\u003c\/p\u003e\n\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\n\u003ch2 class=\"text-text-100 mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eWhat Ships in the KITSHOEMTX50 Kit\u003c\/h2\u003e\n\u003cdiv class=\"overflow-x-auto w-full px-2 mb-6\"\u003e\n\u003ctable class=\"min-w-full border-collapse text-sm leading-[1.7] whitespace-normal\"\u003e\n\u003cthead class=\"text-left\"\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\" class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\"\u003eComponent\u003c\/th\u003e\n\u003cth scope=\"col\" class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\" class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\"\u003eFunction\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eLaminated wood shoe pad\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e10.4 in (265 mm) wide; multi-ply construction\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eMulti-layer ground-contact wear surface; engineered for shock absorption\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eTempered steel base plate\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eSized for direct fit on MTX50HD and MTX60HD foot housing\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eStructural interface between wood pad and rammer foot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eSquare-neck mounting bolts (10×55 mm)\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eQuantity: 7\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eThrough-bolt the wood pad to the steel plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eLock washers (M10)\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eQuantity: 7\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eAnti-loosening preload retention under impact\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eNylon lock nuts (M10)\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eQuantity: 7\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eVibration-resistant nut-side retention\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e \u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003ePer the \u003cstrong\u003eMultiquip MTX-Series Operation Manual\u003c\/strong\u003e, the foot construction is described as \u003cstrong\u003e\"laminated wood with tempered steel plate for superior shock absorption.\"\u003c\/strong\u003e That two-layer engineering is what protects the bellows and spring components above from sharp impulse loading — the wood absorbs progressively, the steel transmits the structural load, and the rest of the rammer sees a managed impact profile rather than a brutal direct hit.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe seven 10×55 mm square-neck bolts (with their matching M10 lock washers and M10 nylon lock nuts) are the items marked with the \"#\" designator in the MTX60HD Parts Manual Rev. #11 — they're the wood-pad-to-steel-plate fasteners that ship inside the KITSHOEMTX50 kit.\u003c\/p\u003e\n\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\n\u003ch2 class=\"text-text-100 mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eWhy One Shoe Kit Fits Both Rammers\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eMultiquip engineers the MTX50HD and MTX60HD around the same \u003cstrong\u003e10.4-inch shoe footprint\u003c\/strong\u003e — the same bolt pattern, the same hardware grade, the same base plate geometry. The two rammers differ in operating weight, impact force, and intended duty cycle, but the foot interface where the shoe bolts on is shared.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eFor fleet managers running mixed MTX50HD and MTX60HD inventory\u003c\/strong\u003e, this means one shoe SKU covers both machines. No separate parts orders, no risk of grabbing the wrong part from the shop shelf, no inventory complexity.\u003c\/p\u003e\n\u003ch3 class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eMTX50HD vs. MTX60HD — Side-by-Side\u003c\/h3\u003e\n\u003cdiv class=\"overflow-x-auto w-full px-2 mb-6\"\u003e\n\u003ctable class=\"min-w-full border-collapse text-sm leading-[1.7] whitespace-normal\"\u003e\n\u003cthead class=\"text-left\"\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\" class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\"\u003eSpecification\u003c\/th\u003e\n\u003cth scope=\"col\" class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\"\u003eMTX50HD\u003c\/th\u003e\n\u003cth scope=\"col\" class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\"\u003eMTX60HD\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eEngine\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eHonda GX100\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eHonda GX100RTKRBF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eEngine Displacement\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e98 cc\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e98 cc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eMax Engine Output\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e3.0 hp \/ 3,600 rpm\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e3.0 hp \/ 3,600 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eImpact Force\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e2,316 lbf\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e3,060 lbf (13.6 kN)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eBlows per Minute\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eUp to 690\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eUp to 695\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eOperating Weight\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e129 lbs (~58 kg)\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e141 lbs (64 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eShoe Width\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e10.4 in (265 mm)\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e10.4 in (265 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eShoe Footprint\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e10.4 × 13.4 in\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e10.4 × 13.4 in (265 × 340 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eBest Application\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eLight-duty \/ confined-space compaction\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eMid-class commercial backfill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eReplacement Shoe Kit\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e\n\u003cstrong\u003eKITSHOEMTX50\u003c\/strong\u003e (supersedes 362910150)\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e\n\u003cstrong\u003eKITSHOEMTX50\u003c\/strong\u003e (supersedes 362910150)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e \u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe shoe replacement interval differs slightly between the two rammers because the duty cycles differ:\u003c\/p\u003e\n\u003cdiv class=\"overflow-x-auto w-full px-2 mb-6\"\u003e\n\u003ctable class=\"min-w-full border-collapse text-sm leading-[1.7] whitespace-normal\"\u003e\n\u003cthead class=\"text-left\"\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\" class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\"\u003eRammer\u003c\/th\u003e\n\u003cth scope=\"col\" class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\"\u003eTypical Shoe Replacement Interval\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e\n\u003cstrong\u003eMTX50HD\u003c\/strong\u003e on light-duty trench work\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e8–14 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e\n\u003cstrong\u003eMTX60HD\u003c\/strong\u003e on mixed-substrate commercial work\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e6–12 months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e \u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eWhy the MTX50HD doesn't always last longer despite lower impact force:\u003c\/strong\u003e Lightweight rammers see more pivoting, more confined-space work, and more transport between job sites. Each of those introduces asymmetric loading on the shoe that a heavier, less-frequently-moved unit doesn't experience.\u003c\/p\u003e\n\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\n\u003ch2 class=\"text-text-100 mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eWhen to Replace the Shoe\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe MTX50HD and MTX60HD Operation Manuals both list shoe inspection under \u003cstrong\u003edaily preventive maintenance\u003c\/strong\u003e. The shoe is treated as a scheduled-replacement consumable, not a run-to-failure part.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eField signals indicating immediate replacement:\u003c\/p\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eVisible cracks\u003c\/strong\u003e running across the wood face, especially radiating from bolt holes\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eLamination separation\u003c\/strong\u003e — the multi-ply wood begins coming apart at the edges\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eMushroomed or recessed bolt heads\u003c\/strong\u003e from impact deformation\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eAsphalt, gravel, or aggregate embedded\u003c\/strong\u003e in the wood causing imbalance\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eUneven wear pattern\u003c\/strong\u003e across the face indicating asymmetric impact distribution\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eAudible change\u003c\/strong\u003e in the rammer's compaction note — a fresh shoe sounds tight; a worn one sounds dull\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eRunning a worn shoe past these signals risks foot housing damage, premature bellows failure, and spring cylinder wear — all components that cost significantly more than the shoe kit itself.\u003c\/p\u003e\n\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\n\u003ch2 class=\"text-text-100 mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eUniversal Installation Notes\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe KITSHOEMTX50 installs on both rammers using the same procedure:\u003c\/p\u003e\n\u003col class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-decimal flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eShut down and let the foot housing cool\u003c\/strong\u003e before disassembly. Muffler heat soaks adjacent components during operation.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003ePhotograph the existing bolt orientation\u003c\/strong\u003e before removing the worn shoe. Square-neck bolts seat in specific orientations on the steel plate, and reproducing the pattern from memory wastes bench time.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eInspect the foot housing mating surface\u003c\/strong\u003e for impact damage from the failed shoe. If you see scoring or hairline cracks in the housing itself, address that before installing the new shoe to prevent recurring premature failure.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eUse the OEM hardware that ships with the KITSHOEMTX50 kit.\u003c\/strong\u003e The square-neck bolts are graded for the impact regime; substituting hardware-store bolts is the most common cause of premature loosening.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eTorque the new hardware in a cross-pattern sequence\u003c\/strong\u003e, not sequentially around the perimeter. Cross-pattern torquing creates even preload distribution.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eRe-torque after the first 30 minutes of run time\u003c\/strong\u003e, again at 4 hours, then once more at the 24-hour mark. Bolt preload migrates during the first day of operation under impact loading; after that, the joint is settled.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\n\u003ch2 class=\"text-text-100 mt-3 -mb-1 text-[1.125rem] font-bold\"\u003ePart Identification \u0026amp; Cross-Reference\u003c\/h2\u003e\n\u003cdiv class=\"overflow-x-auto w-full px-2 mb-6\"\u003e\n\u003ctable class=\"min-w-full border-collapse text-sm leading-[1.7] whitespace-normal\"\u003e\n\u003cthead class=\"text-left\"\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\" class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\"\u003eIdentifier\u003c\/th\u003e\n\u003cth scope=\"col\" class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\"\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eCurrent Multiquip Part Number\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e\u003cstrong\u003eKITSHOEMTX50\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eSuperseded \/ Legacy Part Number\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e\u003cstrong\u003e362910150\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eMultiquip Internal Designation\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eFoot Assembly 265W M4B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eBrand\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eMultiquip Mikasa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eProduct Type\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eTamping Rammer Foot Assembly \/ Wood Shoe Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eShoe Width\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e10.4 in (265 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eShoe Footprint\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e10.4 × 13.4 in (265 × 340 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eOEM Status\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eYes — Genuine Multiquip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eHardware Included\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eYes (7 bolts, 7 lock washers, 7 nylon lock nuts)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eCompatible Rammers (this listing)\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eMTX50HD, MTX60HD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eAuthorized Dealer\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eDanseUSA (since 1981)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\n\u003ch2 class=\"text-text-100 mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ: What's the difference between KITSHOEMTX50 and 362910150?\u003c\/strong\u003e KITSHOEMTX50 is the \u003cstrong\u003ecurrent\u003c\/strong\u003e Multiquip part number for this 10.4-inch wood shoe kit. \u003cstrong\u003e362910150\u003c\/strong\u003e is the \u003cstrong\u003elegacy \/ superseded\u003c\/strong\u003e part number. Both reference the same physical product. If your service records cite 362910150, order KITSHOEMTX50 — it's the direct factory replacement.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ: Will KITSHOEMTX50 fit my MTX50HD?\u003c\/strong\u003e Yes. The 10.4-inch shoe footprint is identical between the MTX50HD and MTX60HD. The same KITSHOEMTX50 kit fits both machines.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ: Will KITSHOEMTX50 fit my MTX60HD?\u003c\/strong\u003e Yes. The MTX60HD ships from the factory with this same 10.4-inch shoe assembly. KITSHOEMTX50 is the genuine OEM replacement.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ: Does the kit come with bolts, washers, and nuts?\u003c\/strong\u003e Yes. The OEM KITSHOEMTX50 ships with all mounting hardware required for installation — seven 10×55 mm square-neck bolts, seven M10 lock washers, and seven M10 nylon lock nuts. No separate hardware purchase is needed.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ: What is \"Foot Assembly 265W M4B\"?\u003c\/strong\u003e That's Multiquip's internal designation for this assembly. The \"265W\" refers to the shoe width in millimeters (265 mm = 10.4 inches); \"M4B\" is the model-version designation. It's the same product as KITSHOEMTX50 \/ 362910150.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ: How is the wood shoe constructed?\u003c\/strong\u003e Per Multiquip's Operation Manual, the foot is \"laminated wood with tempered steel plate for superior shock absorption.\" The wood pad is a multi-ply laminate engineered to absorb impact progressively. The steel plate provides the structural interface to the rammer foot housing.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ: How often should I replace the wood shoe?\u003c\/strong\u003e For typical commercial use: MTX50HD every 8–14 months; MTX60HD every 6–12 months. Inspect daily and replace at the first sign of cracking, lamination separation, or bolt-head deformation.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ: Will replacing the shoe void my Multiquip warranty?\u003c\/strong\u003e No — replacing wear components like the shoe is normal preventive maintenance and does not affect warranty terms. Using the genuine OEM KITSHOEMTX50 keeps the rammer in factory-spec configuration.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ: Will an aftermarket 10.4-inch shoe work on my MTX50HD or MTX60HD?\u003c\/strong\u003e Aftermarket shoes are sold by various suppliers, but tolerance accuracy on bolt-hole alignment, wood lamination grade, and steel plate temper varies significantly. The genuine OEM KITSHOEMTX50 meets factory tolerances and is compatible with Multiquip's warranty terms. For commercial operators where downtime cost outweighs unit cost, OEM is typically the lower-total-cost choice over the rammer's service life.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ: Does KITSHOEMTX50 fit any other Multiquip rammers besides MTX50HD and MTX60HD?\u003c\/strong\u003e The 10.4-inch shoe is shared across additional Multiquip models including MTX60HF, MT-E55, MT54F, MT55F, MT60, and DR-50. If you need confirmation for a different model, contact us with your serial plate photo.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ: How is the KITSHOEMTX50 shipped?\u003c\/strong\u003e DanseUSA ships in original Multiquip packaging via standard ground service. Some MTX-Series components may ship from Multiquip's distribution warehouse direct — when that happens, your order may arrive in separate packages with individual tracking numbers.\u003c\/p\u003e\n\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\n\u003ch2 class=\"text-text-100 mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eImportant Ordering Notes\u003c\/h2\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eMake sure the part numbers are correct, certain parts are serial number specific.\u003c\/strong\u003e The MTX50HD and MTX60HD have been through multiple production revisions — verify your machine's serial plate matches the model designation before ordering.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eContact us for parts identification and confirmation of part numbers.\u003c\/strong\u003e Email \u003ccode class=\"bg-text-200\/5 border border-0.5 border-border-300 text-danger-000 whitespace-pre-wrap rounded-[0.4rem] px-1 py-px text-[0.9rem]\"\u003ecustomerservice@danseusa.com\u003c\/code\u003e with photos of your engine label, serial plate, and existing shoe assembly. Same-business-day verification on all parts inquiries.\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eCertain items may be drop shipped direct from the manufacturer.\u003c\/strong\u003e Your order may arrive in separate packages with individual tracking numbers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\n\u003ch2 class=\"text-text-100 mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eWhy Order from DanseUSA\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eDanseUSA has been an \u003cstrong\u003eauthorized Multiquip parts dealer since 1981\u003c\/strong\u003e. Every KITSHOEMTX50 ships in original Multiquip packaging through authorized supply channels — same OEM part the local Multiquip-authorized service center installs, eligible for any open Multiquip warranty on your rammer.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eMost orders placed before noon ET ship the same business day. Questions on fitment, serial-number breaks, or fleet pricing for multi-unit orders? Email \u003ccode class=\"bg-text-200\/5 border border-0.5 border-border-300 text-danger-000 whitespace-pre-wrap rounded-[0.4rem] px-1 py-px text-[0.9rem]\"\u003ecustomerservice@danseusa.com\u003c\/code\u003e with photos of your unit's engine label and existing shoe assembly. Same-business-day response.\u003c\/p\u003e","brand":"MultiQuip","offers":[{"title":"Default Title","offer_id":46262128935138,"sku":"362910150","price":359.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/0204\/2082\/files\/KITSHOEMTX50_60_cd83280d-522c-4716-9f5f-bd6216120b00.png?v=1778443211","url":"https:\/\/www.danseusa.com\/products\/multiquip-mikasa-kitshoemtx50-362910150-wood-shoe-kit-mtx50hd-mtx60hd","provider":"Danse USA","version":"1.0","type":"link"}