{"product_id":"northrock-pro-2-electric-concrete-vibrator-motor-25l2","title":"Northrock PRO 2+ (25L2) 2 HP Electric Concrete Vibrator Motor","description":"\u003ch2\u003eNorthrock PRO 2+ Electric Concrete Vibrator Motor — 2 HP, 115V, 15 Amp\u003c\/h2\u003e\n\n\u003cp\u003eThe Northrock \u003cstrong\u003ePRO 2+\u003c\/strong\u003e (model \u003cstrong\u003e25L2\u003c\/strong\u003e, or \u003cstrong\u003e25L2QD\u003c\/strong\u003e with quick-disconnect) is Northrock's most versatile electric power unit and the go-to motor for general construction, rental fleets, and ready-mix contractors who pour a mix of slab, wall, and column work. The 2 HP universal motor powers Northrock flexible shafts and vibrator heads up to \u003cstrong\u003e2-1\/2\" diameter\u003c\/strong\u003e — the full Northrock head range — and still runs off a standard 115V \/ 20A circuit at 15 amps.\u003c\/p\u003e\n\n\u003cp\u003eDesigned and built in Bohemia, NY. \u003cstrong\u003eUL \/ cUL Listed.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eBuilt for the rental yard and the daily-use contractor\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOne motor, full head range.\u003c\/strong\u003e Drives 3\/4\", 1\", 1-1\/4\", 1-1\/2\", 1-3\/4\", 2\", and 2-1\/2\" Northrock heads with the correct shaft — no need to match a specialty motor to each head size.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-strength cast aluminum housing\u003c\/strong\u003e — dissipates heat far better than plastic competitors during long continuous pours.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRugged shock-absorbing frame\u003c\/strong\u003e — takes drops, doubles as a carry handle, and protects the rocker switch from side impact.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWatertight strain-relief cord entry\u003c\/strong\u003e — prevents the #1 jobsite failure: pulled or flooded power cords.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e115V \/ 15A\u003c\/strong\u003e — runs on a standard job trailer or generator outlet; no 20A-dedicated circuit required like the PRO 3+.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eQuick-disconnect version (25L2QD)\u003c\/strong\u003e — swap shaft lengths and head sizes in seconds between pours.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFully field-serviceable.\u003c\/strong\u003e Brushes, bearings, armature, field coil, switch, cord, and frame are all individually replaceable OEM parts — available right here at DanseUSA.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMulti-brand compatible.\u003c\/strong\u003e Adapter-ready for Wacker M1000\/M2000\/M3000, Wyco 990\/991\/992\/993 series, Stow, Oztec 1.2–3.2, Mikasa \/ Multiquip PMA, Stone, Dynapac, Viber, Master, and Remington shafts and heads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eModel: PRO 2+ (25L2 \/ 25L2QD)\u003c\/li\u003e\n  \u003cli\u003eMotor: 2 HP, single-phase, universal\u003c\/li\u003e\n  \u003cli\u003eVoltage: 115V, 60 Hz\u003c\/li\u003e\n  \u003cli\u003eAmp draw: 15 A (standard outlet compatible)\u003c\/li\u003e\n  \u003cli\u003eMax vibrator head diameter: 2-1\/2\"\u003c\/li\u003e\n  \u003cli\u003eMax flexible shaft length: up to 60 ft with connector\u003c\/li\u003e\n  \u003cli\u003eTarget vibration frequency: ~10,000 VPM under load\u003c\/li\u003e\n  \u003cli\u003ePlug type: 3-prong grounded (standard NEMA 5-15)\u003c\/li\u003e\n  \u003cli\u003eListings: UL \/ cUL\u003c\/li\u003e\n  \u003cli\u003eOrigin: Made in USA — Bohemia, NY\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBest applications\u003c\/h3\u003e\n\u003cp\u003eWalls, columns, piers, slabs-on-grade, structural foundations, bridge work, tilt-up panels, and mid-volume commercial pours. The PRO 2+ is the right motor if you need one power unit that can handle both a 1-1\/4\" pencil head for rebar-congested walls in the morning and a 2\" or 2-1\/2\" head on a large footing in the afternoon.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cp\u003eMotor \/ power unit only. \u003cstrong\u003eFlexible shafts and vibrator heads are sold separately.\u003c\/strong\u003e Northrock standard-duty shafts are stiffer for better poking control; pencil shafts (used with 3\/4\" and 1-1\/4\" heads) are more flexible for rebar-dense pours. DanseUSA stocks shafts from 2 ft through 30 ft in single lengths, extendable to 60 ft with a shaft connector.\u003c\/p\u003e\n\n\u003ch3\u003eChoosing PRO 2+ vs. PRO 1.5+ vs. PRO 3+\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePRO 1.5+\u003c\/strong\u003e — lighter and cheaper; tops out at 1-1\/2\" heads. Best for residential slab crews.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePRO 2+\u003c\/strong\u003e — the universal choice. Full head range, standard 15A outlet.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePRO 3+\u003c\/strong\u003e — heavy-duty workhorse for low-slump mixes, precast plants, and continuous production; requires a 20A non-standard outlet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy buy from DanseUSA\u003c\/h3\u003e\n\u003cp\u003eAuthorized Northrock dealer with same-day shipping on in-stock orders placed before 12 PM ET. Full OEM parts backup for the 25L2 \/ 25L2QD — including motor housing 105AD1 — so a single brush, bearing, or switch replacement keeps a $400–$600 motor working for another thousand hours instead of becoming scrap. Questions? Email \u003ca href=\"mailto:customerservice@danseusa.com\"\u003ecustomerservice@danseusa.com\u003c\/a\u003e.\u003c\/p\u003e","brand":"NORTHROCK","offers":[{"title":"Default Title","offer_id":47707358626018,"sku":null,"price":550.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0728\/0204\/2082\/files\/Northrock2Plusmotor.png?v=1776547746","url":"https:\/\/www.danseusa.com\/products\/northrock-pro-2-electric-concrete-vibrator-motor-25l2","provider":"Danse USA","version":"1.0","type":"link"}