Wacker PS3 2203 3 inch Submersible Pump 3 HP 203.4 GPM

Wacker PS3 2203 3 inch Submersible Pump 3 HP 203.4 GPM

Portable, Three phase submersible pumps are designed to handle water and solids. Built for the demands of construction, mining, municipality and farm applications.

Features :

• Compact slim line design in a rugged cast iron case
• Top discharge, flow-through design enables operation at low water levels for extended periods
• Durable high chrome impeller with ductile iron wear plate reduces wear when pumping abrasive materials
• Heavy-duty power cord with strain relief resists pullout and abrasion reducing costly repairs
• Insulation on all conductors of the power cable are protected by a water block system to prevent wicking of water into the motor
• Silicon carbide double mechanical seals run in an oil-filled cavity allowing for seal lubrication, cooling and overall motor protection
• Additional lip seal protects mechanical seal from abrasive wear due to suspended debris in pumping fluid
• High efficiency, continuous duty motor with built-in thermal and over current motor protection increases motor life

Specifications:

Dimensions

L x W x H in : 9.25 x 8.50 x 19.61

Diameter Discharge in : 3 Inch

Operating weight lb : 71 lbs

Cable length ft : 50

Cable Size AWG : 16

Operating data

Total head ft : 66.93

Discharge capacity US gpm : 203.4

Solids diameter in : 0.334

Engine / Motor type : 60 Hz 3~

Operating voltage V : 220 / 440

Current Full Load A : 9.3 / 4.7

Current Start A : 73 / 36

at rpm rpm : 3,435

Refer to the attached sheet for in depth specifications