Husqvarna Soffcut 150 and FS5000D genuine parts for construction equipment

Complete Guide to Husqvarna Construction Equipment Parts: From Soff-cut 150 to FS5000D

Frustrated because your concrete job’s slowing down due to a missing part or worn-out component? You’re not alone. Contractors running Husqvarna machines know the struggle: the Soffcut 150 won’t slice cleanly, the FS5000D needs a part swap, or the power trowel just isn’t performing the way it should.

Are you struggling to find original Husqvarna Soffcut 150 parts online? This guide is designed to help you in those critical downtime moments. We’ll show you the key Husqvarna parts and other critical concrete cutting machine parts and trowel components—with their diagrams and model-specific references—so you can order the right part fast and get your equipment back to work without the guesswork.

Husqvarna Soffcut 150 Parts

To keep your Soffcut 150 saw operating at peak performance, it’s essential to understand its key assemblies. These include the wheel carriage, saw engine, main frame, guide arm, and more—each made up of multiple components that can be tricky to identify or replace correctly. Misunderstanding these parts often leads to delays and incorrect orders, so we’ll break them down clearly in this guide.

Screenshot From DanseUSA’s Soff-Cut 150 Saw Engine Assembly Parts

Use this diagram to find the engine parts correctly. We’ve highlighted the key components in order, so you can identify the exact part you need and order it right here.

All the engine assembly parts shown in the diagram are available for purchase, with detailed callouts for each component. If you want to explore other assemblies, like the blade block or belt tensioner, you can find them over here.

Husqvarna Walk-Behind Saws Parts

When you’re working with walk-behind saws, the parts that keep you cutting straight and steady usually come down to a few assemblies, the engine and drive, blade shaft, belt tensioner, and water kit. DanseUSA’s exploded diagrams make it easy to see how these connect before you order a single bolt.

If you’re running an FS400, you’re working with lighter assemblies, smaller flanges, handwheel controls, compact drive parts. The Husqvarna FS5000D parts step it up with a stronger belt system and bigger flanges for heavy concrete cuts. And for large-scale jobs, the FS7000D adds reinforced bearings and IntelliSeal shaft seals that can take constant duty loads.

Here’s what most contractors get wrong, they mix parts across models, reuse stretched belts, or grab “almost-fit” spacers. The result? Blade wobble, burnt belts, or uneven cuts. The fix is simple: use the right diagram, match the callout number, and check fitment before you buy.

Before you order:

  1. Open your model’s diagram (FS400, FS5000D, or FS7000D).

  2. Find the assembly you’re working on, blade shaft, engine mount, or guard.

  3. Click the part callout to confirm the exact SKU and image.

If anything’s unclear, reach out to DanseUSA experts, they’ll confirm which assembly fits your serial.

👉 Explore Husqvarna Walk-Behind Saw Parts at DanseUSA 

Browse all Husqvarna models — including FS400, FS5000D, and FS7000D — in one place. Each model page includes full parts diagrams, letting you pinpoint exact assemblies and compatible replacements before you order.

Husqvarna Handheld Saw & Concrete Cutting Machine Parts

For the Husqvarna handheld / concrete cutting line (e.g. K970, K760, etc.), these assemblies usually carry the wear & tear:

  • Clutch / Drive assembly — the part between the engine and blade. This includes the clutch housing, springs, and engagement plates.

  • Blade flange, reducers & adapters — parts that secure the diamond blade to the shaft. Wrong flange size = vibration or damage.

  • Carburetor / Fuel system — fuel lines, jets, gaskets. When saw won’t respond or stalls, this is one of the first places to check.

  • Throttle & control linkage — cables, levers, and housing that connect your trigger to blade speed.

  • Starter / ignition components — recoil starter assembly, ignition coils, starter springs.

  • Air & exhaust parts — filters, muffler parts, gaskets that prevent overheat and keep the engine clean.

At DanseUSA, for example, if you look at the K970, you’ll see components like the clutch assembly, throttle cable assembly, carburetor, and air filter, all clearly marked in the diagram for quick identification.

Husqvarna Power Trowel Parts

Both ride-on and walk-behind Husqvarna power trowel parts can be found at DanseUSA. Within each, there are a variety of models, such as CRT 36, CRT 48, and CRT 48 Petrol for ride-on, as well as BG 245 and BG 245 E for walk-behind.

Whether you’re replacing blades, pitch controls, or gearbox components, each listing makes it easy to identify and order the exact part you need for smooth, even finishing results.

Explore Husqvarna Power Trowel Parts — find exact-fit components for CRT and BG series models.

Conclusion

Understanding your machine’s parts isn’t just about maintenance, it’s what keeps your equipment efficient, precise, and always ready for the job. Explore DanseUSA’s detailed diagrams for every Husqvarna model to find exactly what you need.

And if you’re unsure which part fits your setup, get in touch with our experts — we’ll help you choose the right components to keep your tools running like new.

FAQs

1. How do I locate the correct part for my Husqvarna saw or trowel?

Begin by knowing your machine model, such as Husqvarna FS5000D parts, K970, or CRT 48. Next, look up DanseUSA's parts diagrams for that model. Each diagram has each assembly and piece clearly labeled so you can look for the exact part before you order.

2. What if I am not confident about which assembly the broken part falls under?

That's normal. Refer to the visual diagram, for instance, if the problem is in the clutch, throttle, or blade assembly. If still unsure, you may reach DanseUSA's staff with a photo or model number for immediate verification.

3. Are these replacement parts genuine Husqvarna?

Yes. All the parts found on DanseUSA are OEM-grade Husqvarna parts, made for fit, performance, and durability.

4. Can I buy individual components or do I need to purchase a full assembly?

You can do both. Many assemblies are broken down into individual components (like bolts, filters, and housings), so you can replace only what’s needed instead of buying the whole unit.

5. What if the part I require is not in the diagram?

Certain smaller parts might not be shown in each diagram. If so, contact DanseUSA with your model number and brief description, our staff can assist in finding or procuring the precise part for you.

 

Back to blog