Top Concrete Equipment Parts You Should Know: From Oztec Vibrators to MTX70HD Rammers
Concrete work relies on a range of machines, each designed for tasks such as compaction, mixing, and finishing. These tools run under tough job-site conditions, and their components often wear out faster than expected. Below is a breakdown of the top concrete equipment parts you’ll commonly encounter-covering Oztec vibrators, Multiquip rammers, Husqvarna trowels, concrete mixers, handheld saws, and more.
Oztec - Concrete Vibrator Parts
Oztec concrete vibrators deliver consistent, uniform compaction where surface finish and structural strength are crucial. You can find replacement Oztec concrete vibrator parts-such as drive cables, couplings, and clutch drums-are available for all popular models at DanseUSA.
Where They’re Used
- Floor and slab compaction
- Column and beam concreting
- Foundation reinforcement
- Tight reinforcement spaces where maneuverability matters
Over time, wear occurs in the drive cable, clutch drum and motor coupling. Heat, misalignment and friction can reduce clutch life or weaken vibration output. DanseUSA offers detailed, model-specific assembly diagrams for all Oztec backpack vibrators-including BP-35 and BP-50A.
BP-35 Backpack Parts by Oztec
The BP-35 parts diagram shows alignment of key components such as the drive block, throttle control, motor coupling and more, helping users identify exactly which parts need replacement. More models are available under the Oztec Backpack Concrete Vibrator Parts collection.
MTX70HD - Jumping Jack Rammer
The MTX70HD by Multiquip is a widely used rammer for soil compaction due to its balanced weight and impact force. Because rammers operate under constant vibration, wear parts such as bellows, throttle levers, springs and shoe plates often require replacement.
The MTX70HD parts diagram shows how the guide cylinder, spring assembly, shoe and tool housing align to maintain steady compaction. Any damage or misalignment affects compaction depth and vibration rhythm.
DanseUSA lists complete assemblies-clutch, handle, bellows, fuel system components-in the MTX70HD parts catalog.
Husqvarna - Power Trowel Parts
Husqvarna provides ride-on and walk-behind power trowels designed for different finishing applications. Their parts undergo significant stress from torque, contact, and vibration.
Ride-On Trowel Parts
Ideal For:
- Large industrial and commercial slabs
- High-speed smoothing
- Polishing applications
- Continuous operation
Common Parts:
- Drive and clutch assemblies
- Pitch control linkages
- Steering and rotor components
- Frame and guard assemblies
See full diagrams under the Ride-On Trowel Parts section.
Walk-Behind Trowel Parts
Ideal For:
- Tight edges
- Confined slab areas
- Light finishing
- Easy handling
Common Parts:
- Blade pitch systems
- Gearbox and rotor hubs
- Handle and throttle cables
- Engine mounts and guard rings
See diagrams in the Walk-Behind Trowel Parts section.
Concrete Mixers - Multiquip Mixer Parts (MC94 / MC94PH / MC12PH)
Multiquip mixers are known for rugged drum construction and reliable performance. Due to constant rotation and vibration, several components often need replacement.
Common Applications
- General construction and repair
- Concrete batch preparation
- On-site mixing
Parts That Frequently Need Replacement
- Drum assemblies
- Engine and clutch parts
- Drive belts and pulleys
- Bearing supports and frames
- Gear and shaft components
Drum Assembly - MC12PH (Honda GX340 Engine)
The MC12PH drum assembly diagram shows the alignment of the drum, shaft and bearing housings, which keep the load balanced during operation. Worn bearings or misalignment can reduce mixing efficiency or cause vibration.
Handheld Concrete Saw Parts
Handheld concrete saws cut through cured concrete, asphalt, and reinforced slabs. Because they operate at high RPMs under heavy load, their parts often wear quickly.
Brands Available at DanseUSA
- Husqvarna saws
- Makita saws
- Solo saws
- Wacker saws
- Multiquip saws
- Core Cut saws
Common Saw Assemblies
- Blade guards, spindle housings, bearings
- Engine and starter assemblies
- Drive belts, pulleys, clutch systems
- Cooling and air filtration systems
Whether you use a Husqvarna K770 or Makita EK6101, each product page includes complete breakdowns to help identify the correct part.
Choosing the Right Parts for Your Concrete Equipment
From rammers and trowels to saws and mixers, equipment performance depends on the quality of internal components. We provide OEM-quality parts with verified compatibility and accurate diagrams for smooth replacement.
Keep your equipment running like new - explore DanseUSA’s complete collection of genuine concrete equipment parts today.
FAQs
1. How do I know which part fits my specific concrete tool model?
Each DanseUSA product page includes model references and assembly diagrams. Locate your tool’s model number and match it on our website before ordering.
2. Are the parts OEM or aftermarket?
DanseUSA supplies OEM-quality and approved replacement parts sourced from leading brands such as Multiquip, Makita, Husqvarna, and Oztec.
3. Can I order individual parts instead of full assemblies?
Yes. Most diagrams allow you to select individual components so you can replace only what’s needed.