Description
Description:
Everything that makes chainsaws the preferable method in cutting concrete, stone, and masonry wrapped in a power-filled package called ICS 695GC using Force3 series bar and chains. All the great features from past ICS chain saws plus a few new innovations to make deep, straight cuts and square corners with ease of use and dependable performance.
Features:
- Use on concrete, stone, masonry, ductile iron pipe, cast iron pipe and more
- Requires 20 PSI pressurized water. Do not use standard pump-up water cans as they do not provide enough water. Standard garden hose connection.
- Most versatile gas-power cutter
- New piston and cylinder lowers engine temperature
- Longer life muffler with reinforced internal baffle
- Easy-to-start with the higher energy ignition system
- New easy-to-tune carburetor
Specifications:
| Engine type |
2-stroke, Air-cooled |
| Displacement |
94 cc |
| Horsepower |
6.4 hp @ 9,000 rpm |
| Torque |
5.7 Nm (50.4 in-lbs) @ 7,200 rpm |
| Weight |
21 lbs powerhead only |
| Dimensions LxWxH |
18" x 14" x 12" |
| Starter |
Recoil, dust and water-resistant |
| Ignition |
Special water-resistant electronic |
| Fuel ratio |
50:1 gasoline-to-oil |
| Fuel capacity |
.26 gallons |
| Water supply requirement |
Minimum 20 psi |
| Water flow requirement |
1 gpm |
